VX- 12
VX-18
NX Audio line array is intended for medium to small venues and use concert
proven drivers. The VX-12 & VX-18 drivers delivers extraordinary
power handling, clarity, flexibility and clean sound in an affordable
package.
- Constant Curvature Array - The waveguide mounts three compression drivers on a continuous arc enabling them to work together acoustically as if they were a single driver.
- Amplitude Shading- Convenient series of switches on each enclosures that controls the output of each high frequency section in the array.
- Suspension and Rigging.
- Dual Angle Pole Socket - dual angle pole sockets allow great flexibility in aiming the enclosure to the desired point.
- 12" two-way, line array loudspeaker system
- Freq Resp: 80 Hz - 20 kHz
- Coverage: 100ºx15º nominal
- Crossover Modes: Bi-amp/passive, externally switchable
- Crossover Freq: 1.2 kHz
- Power (RMS/Program):
- Passive: 400 W / 800 W
- Bi-amp LF: 400 W / 800 W
- Bi-amp HF: 75 W / 150 W
- Max SPL: Passive: 126 dB SPL, Bi-amp LF: 126 dB SPL,
- Bi-amp HF: 133 dB SPL
- System Sensitivity (1w @ 1m): Passive: 98 dB SPL,
- Bi-Amp LF: 98 dB SPL, Bi-Amp HF 109 dB SPL
- LF Driver 1 x 12in neodymium magnet
- HF Driver 3 x 25.4 mm (1.0 in) voice-coil, neodymium magnet compression driver
- Nominal Impedance: Passive: 12 ohm,
- Bi-amp LF 12 ohms, Bi-amp HF: 12 ohms
- Weight: 27 kgs
 VX-12 SIDE VIEW |
 VX-12 & VX-18 SUB |
 VX-12 REAR |
VX-18 Technical Specification:
- 18" bass-reflex subwoofer for extended low frequency output.
- Light and compact for versatility and easy handleability.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Rubber studs on top for stacking
- Frequency Response: 36 Hz - 200 Hz
- Recommended Crossover Frequencies:
- 80 Hz, 24 dB / octave HPF
- Power Rating (RMS/Program): 800 W / 1600 W
- Maximum SPL: 127 dB SPL peak
- Sensitivity (1w @ 1m): 100 dB SPL
- LF Driver: 1 x 18 in
- Nominal Impedance: 8 ohm
- Enclosure: Rectangular, 18 mm,
- 13-ply birch plywood