High
quality compression driver with dome diaphragm in pure titanium, offers
high efficiency and low distortion over the
medium and high frequencies band. It can be successfully used in studio monitors, stage boxes and sound reinforcement in small rooms, where a high performance is requested. This performance results from the proper combination of the components. Diaphragm type dome in pure, rigid, light and extremely thin titanium (0.025 mm). To avoid stress and distortion, the suspension has a special design. Injected phase plug in engineering plastic, optimized to eliminate undesirable phase cancellations. Magnetic assembly that concentrates flux in the gap, optimized
using FEA(Finite ElementAnalysis). Voice coil manufactured inCCAW(Copper CladAluminium Wire), Kapton former, assures great stability and thermal resistance. The moving assembly has a perfect auto-centering characteristic that turns replacement in an easy task.
medium and high frequencies band. It can be successfully used in studio monitors, stage boxes and sound reinforcement in small rooms, where a high performance is requested. This performance results from the proper combination of the components. Diaphragm type dome in pure, rigid, light and extremely thin titanium (0.025 mm). To avoid stress and distortion, the suspension has a special design. Injected phase plug in engineering plastic, optimized to eliminate undesirable phase cancellations. Magnetic assembly that concentrates flux in the gap, optimized
using FEA(Finite ElementAnalysis). Voice coil manufactured inCCAW(Copper CladAluminium Wire), Kapton former, assures great stability and thermal resistance. The moving assembly has a perfect auto-centering characteristic that turns replacement in an easy task.
| TECHNICAL SPECIFICATIONS: | ||
| Throat diameter | 25mm | |
| Power Handling | 60 Wattts RMS | |
| Musical program power | 120 | |
| Impedance
|
8 | |
| SPL 1 W @ 1m (dB) | 109 | |
| Frequency Resp @-10 dB (Hz) | 1.000 to 21.000 | |
| Magnet
weight g (oz) |
675g | |
| Voice coil diameter mm (in) | 44 mm | |
| Cut
freq at 12 dB/Oct (Hz) |
1.500 Hz | |
| Testing Horn | HL44-25 | |
| Diaphragm
material |
Titanium | |
| Horn connection | Faston | |
| Cover/base material | Plastic | |